Printer Error Page Troubleshooting

The purpose of this page is to provide the maximum information to determine the printer’s error and its solution. The way our printers are diagnosed are through the Power and Error lights, They are called Error Indicators. The error and the power lights will blink at different intervals which will mean a different type of […]

How to fix Star Micronics printers when you have recently upgraded to Windows 10

Introduction This guide explains how to fix problems occurring with Star Micronics printers after you upgrade to Windows 10 from an older version of Windows, or when you have updated your current Windows 10 device to a newer version of Windows 10. This fix is required for the TSP100 series to print; however, other models […]

How to setup JavaPOS with Star Printer on Ubuntu Linux

Introduction How to use a Star Micronics printer with Ubuntu Linux via the JavaPOS driver. While this was written using a USB TSP650, these directions suffice for the following supported models.   Supported Printers: TSP650II, SP700, TSP700II, HSP7000, TUP500 Supported Interfaces: Serial, Ethernet Supported Environments: Ubuntu Linux 9.04   Install Java Development Kit The Java […]

Installing Splash-proof Cover for Star Micronics Printers

Introduction Click on the PDF linked below to learn how to install the splash proof cover on your Star Micronics printer. Splash Cover Installation (PDF)   Supported Printers: TSP100, TSP100III, TSP650, TSP650II, TSP700II Supported Interfaces: ALL

Enabling Multi Session on the IFBD-HE07/08 Ethernet Card

Introduction This application note shows how to enable Multi Session on IFBD-HE07/08 ethernet cards. This documentation covers enabling this setting by browser and command prompt, so choose the method most comfortable.   Supported Printers: TSP650II, TSP650, TSP700II, TSP800II, TUP500, SP500, SP700, HSP7000, FVP-10, TSP1000 Supported Interfaces: Ethernet (IFBD-HE07/08 Card)   When Is Multi Session Needed? […]

How to Store and Edit Logos and other Graphics Using StarPRNT

Introduction This application note explains how to import, modify, and assign monochrome graphics to be stored in a Star Printer. StarPRNT offers an easy-to use management system for logos, coupons and other image files. While these instructions were written using the TSP700II printer, this document applies to all the models listed models.   Supported Printers: […]

Opening the Cash Drawer from the Windows Command Prompt

Introduction This application note explains how to open a cash drawer connected to the Star Printer through the Windows Command Prompt. These instructions apply for all Star Printers that support cash drawers.   Supported Printers: TSP100 Series, mC-Print Series, TSP650II, FVP10, TSP700II, TSP800II, TSP1000, SP700 Supported Interfaces: Serial, Parallel, USB Applicable Environments: Windows 10 (32/64-bit), […]