How do I print a self test for my printer?
Introduction This application note explains how to print a Self-Test, which is a printout of all of a printer’s configuration settings, to include its firmware version, communication mode, print settings and interface information. Ethernet, Bluetooth and WiFi models will print multi-page Self-Tests. Supported Printers: All Supported Interfaces: All Desktop Thermal Printers (except TSP100ECO): 1) Ensure […]
My Star Micronics thermal printer feeds paper but does not print.
This is usually caused by either using the wrong paper type for your printer model or the paper roll incorrectly installed (e.g., upside down) Thermal printers like the TSP100III, or TSP650II series require thermal-coated paper, whereas impact printers like the SP700 series require bond, or non-thermal coated paper. To verify that the roll is thermal-coated, […]
How to reset a Star Micronics Ethernet or Wi-Fi Printer
Introduction This application note explains how to reset your Ethernet or Wi-Fi Printer to factory default. This may be necessary to reset a printers’s Static IP address and set it to Access Point mode for network configuration, or to reset the printer’s Web Interface password if it was changed from the default and lost/forgotten. For […]
How to Change Swappable Interfaces on Star Printers
Introduction This application note shows how to change interfaces of swappable interface type Star Printers. Swappable interfaces provide the convenience of switching connection type without purchasing a new printer, making upgrades more cost effective. Tools Needed: Star printer, new Star connection interface card, Philips screwdriver Top Mounting Interfaces Ensure the printer is unplugged. […]
How do I read the “Error Status or LED Codes” for my Star Micronics printer?
Fix Error Light: If a printer is malfunctioning, the LED indicators located on the operation or control panel will report the printer error condition. Each LED pattern indicates a specific condition error. For cross reference between LED indications and errors on your printer, refer to the user manual of the product in use. User manuals […]
How To Share a Star Micronics Printer on a Windows PC
Introduction This document explains how to configure the sharing feature on a Windows PC. The feature allows you to share a Star printer that is connected to one computer and share it with another Windows PC. Supported Printers: All Star Micronics thermal and impact printers support this feature Supported Interfaces: All interfaces Supported Environments: […]
How to Install Star Ethernet (LAN) printer on Fedora Linux OS
Introduction This application note explains how to install various Star Ethernet Printers on the Fedora Linux OS. While this document was developed using the TSP100, it is applicable to the printers listed below. Supported Printers: TSP100III, TSP650II, SP700, TSP800II, TSP700II. Supported Interfaces: Ethernet (LAN). Supported Environments: Fedora Linux. Download the CUPS_for_Linux driver from […]
How to Install Star Ethernet (LAN) printer on Ubuntu Linux OS
Introduction This application note explains how to install various Star Ethernet Printers on the Ubuntu Linux OS. While this document was developed using the TSP800, it is applicable to the printers listed below. Supported Printers: TSP100III, TSP650II, SP700, TSP800II, TSP700II. Supported Interfaces: Ethernet (LAN). Supported Environments: Ubuntu Linux. Download the CUPS_for_Linux driver from […]
Adjust the sensor sensitivity of the TSP700II and TSP800II printers
Introduction: This application note explains how to adjust the sensor sensitivity of the TSP700II and TSP800II printers. The sensitivity of the sensor is calibrated at the factory, so sensor adjustment is not necessary under ordinary conditions. However, you may need to make adjustments when using non-recommended paper or when the surrounding environment prevents the sensor […]
Pairing Bluetooth Desktop Printer with iOS device
Introduction: How to pair a Star Bluetooth desktop printer (e.g. TSP650IIBTi) with an iOS device (iPad, iPhone) Supported Printers: TSP650IIBTi, SP700BTi, TSP700IIBTi, TSP800IIBTi Supported Interfaces: Bluetooth Supported Environments: iOS devices Pair TSP650IIBti with an iOS device For Thermal Printers: Perform a self-test page on the printer. This is accomplished by pressing the feed […]