My Account

How To Setup a TSP100IIIW on a WiFi Network

IntroductionThis application note explains how to manually setup the TSP100IIIW on a network without the use of WPS.As an alternative, you may watch a videio with these instreuction by clicking HERE.Supported Printers: TSP100IIIWSupported Interfaces: Wi-FiSupported Environments: iOS, Android, Windows (32/64-bit)Before you beginNOTE: The printer can connet to 2.4GHz networks only. It may be necessary to […]

How to fix Star Micronics printers when you have recently upgraded to Windows 10

Introduction This guide explains how to fix problems occurring with Star Micronics printers after you upgrade to Windows 10 from an older version of Windows, or when you have updated your current Windows 10 device to a newer version of Windows 10. This fix is required for the TSP100 series to print; however, other models […]

Installing Splash-proof Cover for Star Micronics Printers

IntroductionClick on the PDF linked below to learn how to install the splash proof cover on your Star Micronics printer.Splash Cover Installation (PDF)Supported Printers: TSP100, TSP100III, TSP650, TSP650II, TSP700IISupported Interfaces: ALL

Setting Up Graphics on TSP100 using futurePRNT

IntroductionHow to use the futurePRNT Configuration Utility to brand and customize receipts with logos, coupons, and watermarks with NO changes to your existing POS software!Supported Printers: TSP100 seriesSupported Interfaces: USB, PoweredUSB, Ethernet, WirelessSupported Environments: Windows 10 (32bit/64bit), Windows 8.1 (32bit/64bit), Windows 8 (32bit/64bit) Windows 7(32bit/64bit)Adding Graphics to futurePRNTEnsure the TSP100 futurePRNT driver is installed on […]

How to Configure USB-C Port for mCP31C & mCP31CB

IntroductionThis application note explains the steps on how to navigate through the different functionalities of the USB-C port available on the MCP31C/CB printer.Supported Printers: mc-P31C, mc-P31CBSupported Interfaces: AllSupported Environments: Android  StarPRNT Utility (Memory Switch)Plug your device into the USB-C for Android devices.Plug the printer into a power outlet. Power ON the printer. Download the mC-Print Utility App […]

How to enable SteadyLAN on Star mC-Print printers

IntroductionThis application note explains how to enable the SteadyLAN functionality of the applicable Star printers, providing an internet connection to your tablet plugged into the printer with a USB-Lightning (Apple devices) or USB-C (Android and Windows devices) cable.Supported Printers: MCP31L, MCP31LB with Apple devices, and MCP31C, MCP31CB with Android or Windows DevicesSupported Interfaces: USB-Lightning, USB-CSupported […]

How to reset a Star Micronics Ethernet or Wi-Fi Printer

Introduction This application note explains how to reset your Ethernet or Wi-Fi Printer to factory default. This may be necessary to reset a printers’s Static IP address and set it to Access Point mode for network configuration, or to reset the printer’s Web Interface password if it was changed from the default and lost/forgotten. For […]

How to Change Swappable Interfaces on Star Printers

IntroductionThis application note shows how to change interfaces of swappable interface type Star Printers. Swappable interfaces provide the convenience of switching connection type without purchasing a new printer, making upgrades more cost effective.Tools Needed: Star printer, new Star connection interface card, Philips screwdriverTop Mounting InterfacesEnsure the printer is unplugged. To avoid the risk of personal […]