How To Setup a TSP100IIIW on a WiFi Network
Introduction This application note explains how to manually setup the TSP100IIIW on a network with Windows, iOS and Android without the use of WPS. Supported Printers: TSP100IIIW Supported Interfaces: Wi-Fi Supported Environments: iOS, Android, Windows (32/64-bit) * VIDEO GUIDE Before you begin Important: Please take note of your wireless network SSID (Name) and password, as […]
Video – How to configure TP-Link (Wifi Power Pack) with Windows?
How to fix Star Micronics printers when you have recently upgraded to Windows 10
Introduction This guide explains how to fix problems occurring with Star Micronics printers after you upgrade to Windows 10 from an older version of Windows, or when you have updated your current Windows 10 device to a newer version of Windows 10. This fix is required for the TSP100 series to print; however, other models […]
Installing Splash-proof Cover for Star Micronics Printers
Introduction Click on the PDF linked below to learn how to install the splash proof cover on your Star Micronics printer. Splash Cover Installation (PDF) Supported Printers: TSP100, TSP100III, TSP650, TSP650II, TSP700II Supported Interfaces: ALL
Setting Up Graphics on TSP100 using futurePRNT
Introduction How to use the futurePRNT Configuration Utility to brand and customize receipts with logos, coupons, and watermarks with NO changes to your existing POS software! Supported Printers: TSP100 series Supported Interfaces: USB, PoweredUSB, Ethernet, Wireless Supported Environments: Windows 10 (32bit/64bit), Windows 8.1 (32bit/64bit), Windows 8 (32bit/64bit) Windows 7(32bit/64bit) Adding Graphics to futurePRNT […]
Where can I find Programming Manuals for Star Micronics Printers?
Star Micronics proudly supports developers in their efforts to produce the best and most efficient POS software to customers! We have a library of Programming Manuals available containing control codes to make development simpler. Programming Manuals >
How to Configure USB-C Port for mCP31C & mCP31CB
Introduction This application note explains the steps on how to navigate through the different functionalities of the USB-C port available on the MCP31C/CB printer. Supported Printers: mc-P31C, mc-P31CB Supported Interfaces: All Supported Environments: Android StarPRNT Utility (Memory Switch) Plug your device into the USB-C for Android devices. Plug the printer into a power […]
How to enable SteadyLAN on Star mC-Print printers
Introduction This application note explains how to enable the SteadyLAN functionality of the applicable Star printers, providing an internet connection to your tablet plugged into the printer with a USB-Lightning (Apple devices) or USB-C (Android and Windows devices) cable. Supported Printers: MCP31L, MCP31LB with Apple devices, and MCP31C, MCP31CB with Android or Windows Devices […]
How to reset a Star Micronics Ethernet or Wi-Fi Printer
Introduction This application note explains how to reset your Ethernet or Wi-Fi Printer to factory default. This may be necessary to reset a printers’s Static IP address and set it to Access Point mode for network configuration, or to reset the printer’s Web Interface password if it was changed from the default and lost/forgotten. For […]
How to Change Swappable Interfaces on Star Printers
Introduction This application note shows how to change interfaces of swappable interface type Star Printers. Swappable interfaces provide the convenience of switching connection type without purchasing a new printer, making upgrades more cost effective. Tools Needed: Star printer, new Star connection interface card, Philips screwdriver Top Mounting Interfaces Ensure the printer is unplugged. […]