Global Support Site

Help Center

Skip to main content

Table of Contents

Weights and Measures Information – Delaware

You are here:

Introduction

This article provides information for using and maintaining an NTEP-certified scale for commercial applications in the state of Delaware, including registration, installation, calibration, inspection and maintenance requirements.

For the most current requirements, contact the Delaware Department of Agriculture (DDA), Weights and Measures Section.

 

Weights and Measures Information

Phone: (302) 698-4602

Email: deweightsandmeasures@delaware.gov

Website: Delaware Weights and Measures

 

Registration

Delaware follows the requirements of NIST Handbook 44, along with applicable state laws and regulations.

Commercial weighing and measuring devices used in Delaware must meet applicable state requirements and are subject to inspection by the Delaware DDA.

Commercial scales must have a valid NTEP Certificate of Conformance and meet applicable requirements of NIST Handbook 44.

 

Calibration

A Delaware Registered Serviceperson or Registered Service Agency is required to install, calibrate, repair and place a commercial scale into service.

When placing a scale into service, the registered serviceperson or service agency must submit the required Placed in Service Report (PISR) to the Delaware DDA within 24 hours.

The scale may be used commercially after being properly placed into service while awaiting inspection by the Delaware DDA Weights and Measures Section.

 

Maintenance

Have the scale regularly serviced and calibrated to maintain accuracy.

Commercial scales are inspected by the Delaware DDA within a 12-month period, or according to an alternative inspection schedule established by the department, to verify accuracy and compliance.

Scales that fail inspection may be removed from service until corrected and may be subject to enforcement action.

 

Servicers

Company NameCityState/ProvinceCountryPhone NumberCoverageServices
Empire Scale & BalanceNewarkDEUS(302) 369-9163DESERVICE
Legacy Scale LLCMiddletownDEUS(302) 358-8037DE, MD, PASERVICE
Widgeon Enterprises, Inc.DelmarDEUS(302) 846-9763DE, MDSERVICE
Disclaimer: This list was compiled from publicly available sources and may not be current. Verify contact details with the company and license status with the state before engaging their services.

 

Related Materials

NIST Handbook 44 (Current Edition)

NTEP Certification Search

mG-S Certificate of Conformance

mG-T Certificate of Conformance

Delaware Weights and Measures

Delaware Weights and Measures – Tests, Forms & Instructions

Delaware Code – Weights and Measures

Was this article helpful?
How can we improve this article?
Please submit the reason for your vote so that we can improve the article.
Need more help?