Global Support Site

Help Center

Skip to main content

Table of Contents

Weights and Measures Information – Indiana

You are here:

Introduction

This article provides information for using and maintaining an NTEP-certified scale for commercial applications in the state of Indiana, including registration, installation, calibration, inspection and maintenance requirements.

For the most current requirements, contact the Indiana Department of Health (IDOH) Division of Weights and Measures.

 

Weights and Measures Information

Phone: (317) 356-7078

Email: wmstaff@health.in.gov

Website: Indiana Division of Weights and Measures

 

Registration

Indiana follows the requirements of NIST Handbook 44, along with applicable state laws and regulations.

Commercial scales used in Indiana must be inspected and approved by IDOH or the appropriate local weights and measures authority before being used commercially.

Commercial scales must have a valid NTEP Certificate of Conformance and meet applicable requirements of NIST Handbook 44.

 

Calibration

A qualified scale service company or technician is required to install and calibrate the scale before it is used commercially.

A Placed in Service Report (PISR) must be completed for newly installed commercial scales and scales returned to service following repairs.

Once placed into service, the scale is subject to official inspection and approval by IDOH or the appropriate local weights and measures authority.

 

Maintenance

Have the scale regularly serviced and calibrated to maintain accuracy.

Commercial scales are subject to inspection and testing by IDOH or the appropriate local weights and measures authority to verify accuracy and compliance.

Scales that fail inspection may be removed from service until corrected and may be subject to enforcement action.

 

Servicers

Company NameCityStateCountryPhoneCoverageServices
All American Scales IncGreenfieldINUSA(317) 462-9392IN, IL, KY, MISERVICE
Antibus Scales & SystemsFort WayneINUSA(260) 432-3591IN, MISERVICE, ISO 17025
Bill Mills Scale CompanyEvansvilleINUSA(812) 477-5255IN, KYSERVICE
Brechbuhler ScalesColumbusINUSA(812) 372-8374INSERVICE, ISO 17025
Brechbuhler ScalesFort WayneINUSA(260) 496-8469INSERVICE, ISO 17025
Brechbuhler ScalesIndianapolisINUSA(317) 548-7821INSERVICE, ISO 17025
Brechbuhler ScalesSouth BendINUSA(260) 409-4688INSERVICE, ISO 17025
Dynamic Scales IncTerre HauteINUSA(812) 234-3111INSERVICE
Farwick Scale CorporationAndersonINUSA(765) 644-8350INSERVICE
Glosson Food EquipmentFort WayneINUSA(260) 478-1658IN, MISERVICE
Hoosier Scale Company, LLCCambyINUSA(317) 830-8040INSERVICE
Indianapolis Scale CompanyCambyINUSA(317) 856-6606IN, IL, KY, OHSERVICE, ISO 17025
Indianapolis Scale CompanyLafayetteINUSA(317) 856-6606IN, IL, KY, OHSERVICE
Jarvis Food EquipmentEvansvilleINUSA(812) 424-9248IN, KYSERVICE
Koenig Scale Co IncTerre HauteINUSA(812) 877-6121INSERVICE, ISO 17025
Michelli Weighing & MeasurementEvansvilleINUSA(812) 471-9037INSERVICE
Norris Scale Co, IncFort BranchINUSA(800) 727-3046IN, KY, MO, TNSERVICE
Norris Scale Co, IncLafayetteINUSA(800) 727-3046IN, KY, MO, TNSERVICE
Norris Scale Co, IncRushvilleINUSA(800) 727-3046IN, KY, MO, TNSERVICE
Norris Scale Co, IncSullivanINUSA(812) 268-6710IN, KY, MO, TNSERVICE
Shore Measuring SystemsAtticaINUSA(765) 769-3000IN, ILSERVICE
Steinhoffer Scale Co IncFort WayneINUSA(260) 483-1965IN, MI, OHSERVICE
Steinhoffer Scale Co IncMishawakaINUSA(574) 259-5425IN, MI, OHSERVICE, ISO 17025
System ScaleEvansvilleINUSA(800) 474-9838IN, IL, KYSERVICE, ISO 17025
System ScaleIndianapolisINUSA(317) 876-9335INSERVICE, ISO 17025
Technical Weighing Services IncGriffithINUSA(219) 924-3366IN, ALSERVICE
Valley Scale Co LLCClarksvilleINUSA(812) 282-5269IN, KYSERVICE
Disclaimer: This list was compiled from publicly available sources and may not be current. Verify contact details with the company and license status with the state before engaging their services.

 

Related Materials

NIST Handbook 44 (2014 Edition)

NTEP Certification Search

mG-S Certificate of Conformance

mG-T Certificate of Conformance

Indiana Division of Weights and Measures

Indiana Placed in Service Report for Scale Device

Indiana Weights and Measures Laws and Regulations

Indiana Commercial Weighing and Measuring Devices Regulations (410 IAC 12-1)

Was this article helpful?
How can we improve this article?
Please submit the reason for your vote so that we can improve the article.
Need more help?