Video – How to install OPOS or JavaPOS driver with my TSP100 series?
What length USB cable can I use with my Star Micronics USB printer?
Q: What length USB cable can I use with my Star Micronics USB printer? A: 16 feet is the maximum reliable length. We cannot guarantee anything longer.
Ubuntu Linux – Sending Print Commands Directly to a LAN Port
Introduction How to send print commands directly to a LAN port/socket using the Terminal on Ubuntu Linux version 8.04 or higher. While this document was written using the TSP100LAN, these directions suffice for any Linux compatible Ethernet Star Micronics printer. Supported Printers: Thermal, Impact Printer Supported Interfaces: Ethernet Supported Environments: Ubuntu 8.04 or higher […]
Configuring the TSP100ECO’s Top Margin
Introduction How to configure the TSP100ECO’s top margin settings in the futurePRNT Utility. In special instances, the integrator may choose to modify the default top margin. It is possible to configure the first line of print beginning anywhere from 3 mm up to 11 mm (including every integer in between) from the top edge of […]
How to reset a Star Micronics Ethernet or Wi-Fi Printer
Introduction This application note explains how to reset your Ethernet or Wi-Fi Printer to factory default. This may be necessary to reset a printers’s Static IP address and set it to Access Point mode for network configuration, or to reset the printer’s Web Interface password if it was changed from the default and lost/forgotten. For […]
How do I configure Dinerware for guest check printing to my TSP100?
The PDF in this FAQ contains instructions on configuring Dinerware for printing to a USB or PoweredUSB TSP100. Application note – TSP100 Dinerware Did you ever think that purchasing a POS printer would directly affect an increase in sales and returning customers? The TSP100 has completely revolutionized the idea of the “simple” receipt printer with […]
How do I configure POSERA Maitre’D for printing guest checks to my TSP100U?
The PDFs below contain instructions on configuring POSERA Maitre’D for printing guest checks to a USB or Powered USB TSP100. Each PDF is available individually for download or in a zipped package containing all. 1 Application note – Installing a TSP100U 2 Application note – MaitreD TSP100-2 2 Application note – MaitreD TSP100 3 Application […]
How to assign a Virtual Port to the TSP100LAN Series Printers
Introduction This application note explains how to assign a Virtual TCP/IP or Serial Port to the TSP100 series printer on Windows. Supported Printers: TSP100Series Supported Interfaces: Ethernet (LAN), USB Supported Environments: Windows 10 (32/64-bit), Windows 8 (32/64-bit), Windows 7 (32/64-bit). Virtual TCP/IP Port Explanation The TSP100LAN does not natively support direct to ethernet […]
Using a lightning cable with TSP100IIIU on iOS
Introduction This application note explains how to use your Star Printer on iOS devices using a lightning cable. Supported Printers: TSP100IIIU Supported Interfaces: USB Using TSP100IIIUSB with Lightning Cable First, make sure you have the lightning cable plugged into the back of the printer, as well as your device. Next, we will […]
How to install OPOS or JavaPOS on TSP100 Series on Windows OS
Introduction This application note shows how to install OPOS or JavaPOS driver on the Star TSP100 printer on Windows OS. Note: The TSOP100ECO (TSP143IIU) printer was used as an example in this application note, but this document applies to all printer models shown below Supported Printers: TSP100series (TSP100IIIU, TSP100IIIBI, TSP100IIILAN, TSP100IIIW, TSP100GT, TSP100LAN, TSP100ECO, […]