TSP143III Archives - Page 2 of 3

How to Assign a USB-ID to a USB Printer

This application note provides instructions for configuring a USB printer by assigning a USB-ID (serial number) using the USB Serial Number Tool.

How to Add Graphics and Logos to Receipts Using futurePRNT

This article provides instructions for using the futurePRNT Configuration Utility to customize Star TSP100 Series receipts with logos, coupons and watermarks.

How to update the firmware of a Star printer

Firmware updates are normally only necessary to address specific issues. To learn if a firmware update is necessary for your specific printer model, please contact Star Technical Support. To know the current firmware version of your printer, simply print a self-test. It will be located at the top of the page: How to print […]

How to Find a Printer’s MAC Address

This application note provides instructions for finding a printer’s MAC address.

How do I configure Dinerware for guest check printing to my TSP100?

The PDF in this FAQ contains instructions on configuring Dinerware for printing to a USB or PoweredUSB TSP100. Application note – TSP100 Dinerware Did you ever think that purchasing a POS printer would directly affect an increase in sales and returning customers? The TSP100 has completely revolutionized the idea of the “simple” receipt printer with […]

How to Open a Cash Drawer from the Windows Command Prompt

This article provides instructions for opening a printer-driven cash drawer by sending a command directly to a Star printer from the Windows Command Prompt.

How to Change Swappable Interfaces on Star Printers

This article provides instructions for replacing the swappable interface card on supported Star Micronics printers.

How to Read the LED Status on a Star Micronics Printer

This application note provides instructions for identifying printer errors and determining the appropriate solutions.

How To Share a Star Micronics Printer on a Windows PC

Introduction This document explains how to configure the sharing feature on a Windows PC. The feature allows you to share a Star printer that is connected to one computer and share it with another Windows PC. Supported Printers: All Star Micronics thermal and impact printers support this feature Supported Interfaces: All interfaces Supported Environments: Windows […]

How to install OPOS or JavaPOS on TSP100 Series on Windows OS

Introduction This application note shows how to install OPOS or JavaPOS driver on the Star TSP100 printer on Windows OS. Note: The TSOP100ECO (TSP143IIU) printer was used as an example in this application note, but this document applies to all printer models shown below Supported Printers: TSP100series (TSP100IIIU, TSP100IIIBI, TSP100IIILAN, TSP100IIIW, TSP100GT, TSP100LAN, TSP100ECO, TSP100U/PUSB) […]